Article Index: 031
BED
- Barrier – raising capability on one side
- Modular system "D"
|
Dimensions |
|
|
Standard height: |
100–1000 mm |
|
Standard length: |
up to 6000 mm |
|
Special situations: |
upon request |
|
Width: |
50 mm |
The Retention Barrier forms the basis for a modular system for incremental build-up for stationary systems with rotating capability on one side, manual or automatic versions.
Suitable for crack-free surfaces with up to 20 mm (± 10 mm) of floor/ground unevenness, e.g. concrete, corrugated sheet metal, tiles, stones, etc.
The Retention Barrier is comprised of a trapezoidal, integral hollow aluminium profiled body. A compressible, highly adaptable special seal is affixed to the lower side and end faces.
The rotating mount and the tensioning device are securely mounted next to the opening to be secured and then sealed. The closure body is firmly bolted into the hinge. In the resting position, it stands vertically and is protected in accordance with accident prevention measures against being folded down unintentionally. When being used, the securing device is unlocked, the Retention Barrier is folded down manually or actuated by means of a lever-type aid into the tensioning device on the opposite side, and the barrier is locked into place. The contact pressure of the tensioning device is adjustable.
With certain lengths and heights, the closure barrier is counterbalanced with weights. Gas-charged springs are standard for small and medium-size barriers, hand cranks for large and extremely large barriers.
Barrier bodies and mounting fixtures are furnished with a red paint finish, preferably “traffic red” RAL 3020. The remaining metal components are galvanized or made of aluminium.
