Articles

bl-bhs-m mini

Article Index: 036

BHS-M

  • Horizontally swivelling
  • Manual operation

Dimensions

Standard height:

300–1000 mm

Standard length:

up to 5000 mm

Special situations:

upon request

Width:

50 mm (10 mm)


 

Suitable for all surfaces.

The basic version of the Retention Barrier features a rectangular, integral hollow aluminium profiled section with a compressible, partially highly adaptable seal affixed to the side surfaces.

The swivelling apparatus and the abutments of the tensioning device are securely mounted to the floor/ground and wall next to the opening to be secured and then sealed. As an alternative, mounting within the doorjamb is also possible. The barrier body is mounted on hinges. A tensioning lever with two locking devices serves for the purpose of closing. Operation is similar to the procedure of closing a door. For sealing in the area of the floor/ground in the case of Type 1, a floor angle is provided which can be safely walked over and which conforms to accident prevention measures. The floor rail does not apply in the case of Type 2. The barrier body is raised and lowered with the help of a lever-type aid.

Barrier bodies and mounting fixtures are furnished with a red paint finish, preferably “traffic red” RAL 3020. The remaining metal components are galvanized or made of aluminium.

Download Brochure